Cryogenic supports

Supports for cold and cryogenic applications

LISEGA offers a complete range of insulated cryogenic pipe supports for all kinds of low temperature pipe systems. These products are normally used in industrial processes for the production, transport and distribution of liquified gases. These can be propane and butane (LPG), methane (LNG), ethylene, nitrogen or amonia.

The LISEGA cryogenic pipe supports are standardized and designed according to recognized international codes and standards. They cover pipe sizes ranging from OD 21.3mm to OD 965.2mm, with insulation thicknesses from 25mm to 250mm. These supports are manufactured from materials suitable for the specific loads and temperature range for an operating temperature down to -196°C. 

The insulation material of cryogenic pipe supports is made from fire-retarding polyurethane foam of high density (HD-PUF) and forms an integral part of the piping insulation.

		Cryogenic Pipe Support Type 56 LISEGA's standardized cryogenic pipe supports are designed in such a way that they clamp onto the pipe mechanically via disc spring mechanism. The clamp base substructure that supports the HD-PUF foam is made of carbon steel and is hot-dip galvanized as a standard.
		Cryogenic Axial Stop Type 57 Type 57 is based on type 56 but serves as an axial stop and can absorb increased axial loads by means of thrust rings. The thrust rings on the piping consist of two half-rings which are welded together on site.
		Horizontal Clamp Cryogenic Support Through replacing the shoe of the clamp base with a special pipe clamp type 43 the cryogenic pipe supports can be used as a hanger (e.g. in combination with spring or constant hangers).
		Double and Multiple Clamp Base Pipe Supports Type 56 and 57 can be ordered with double or multiple clamp bases, to allow for high upward loads or guided supports.

 Download here the technical information of cryogenic supports