Pipe clamps
The lower side of the hanging suport.
Horizontal or vertical brackets in various designs. For cold and hot pipes. Standard version up to and including O.D. 1219 mm and loads up to 750 kN. Fitting on the other parts of the Lisega modular system.
U-bolts type 40
Type 40 serves mainly to secure piping of max. 80°C temp. to secondary steel structure.
Horizontal clamp type 42
This clamp can be used as a construction component or hanger clamp in cold piping systems. For larger pipe diameters the load range is limited.
Horizontal clamp type 44
A rigid yoke takes on the load from a pipesurrounding U-bolt with an inlay plate. From certain diameters, temperatures or load ranges, a flat steel strap is used instead of a U-bolt.
Weld-on lug type 41
This type is used principally as a pipe connection for piping under 80°C on horizontal pipes or elbows.
Connecting plate type 77
Twice the specified load is possible by coupling two pipe clamps with type 77.
Horizontal clamp type 43
This hanger clamp corresponds to the traditional shape made from flat steel. Its use is limited to an economical range up to a unit weight of approx. 25kg.
Riser clamp type 46/48
The design of this riser clamp exploits the box shape as the best precondition for the economical use of material. The individual parts are bolted together without weldings via socket connections.
Riser clamp type 45
With the riser clamp type 45, the lower range suited to this design is covered. Connection to the vertical piping is made via the shear lugs welded to the pipe. The design and application of the lugs is the responsibility of the piping manufacturer.
