AMM710 single louvre valve for flue gas
Product information
The AMM710 single louvre valve is a valve for flue gas up to a maximum operating temperature of 200ºC. Flue gas systems are characterized by low operating pressures so these valves are manufactured from sheet metal as standard and are suitable for operating pressures up to 0.5 bar. This series of flue gas valves is fitted with a standard bonnet and bracket making it unsuitable for insulation. The valve is designed so that the stuffing box gasket pusher and bolts are not subject to temperature in the pipe, allowing the stuffing box gasket to be serviced from the outside at all times (outside operation).
Depending on the design, different leakage rates can be achieved:
- No seat: rate I ANSI/FCI 70-2 (= relative tightness)
- Metal to metal seat: rate II ANSI/FCI 70-2 (leakage = 0.5% x Kvs)
- Soft seat: rate III ANSI/FCI 70-2 (leakage = 0.1% x Kvs)
- Compressed air system: rate VI ANSI/FCI 70-2 (zero leakage)
Specifications
- Diameter: on request (square and rectangular design possible)
- Pressure class: maximum 1.5 barg
- Temperature range: up to 200ºC
- Connections: wafer type, flanged, welding ends
- Housing material: S275JR, SS 304, SS 316 or special alloys
- Material seals: metal seat, nitrile, EPDM, Viton, silicone, PTFE, graphite
- Operation: manual (worm gearbox), pneumatic, electric.
- For open/close function and modulating function
- Available with accessories such as purge connections, mechanical limitation, etc.
- Available including EN 10204 2.2, 3.1 and 3.2
Application
The single louvre valve for flue gas type AMM710 is often used for air and flue gas with a relatively low temperature where the medium has little or no contamination. These valves are fully adaptable to your requirements.
Standard part of the delivery is a general arrangement drawing and a 3D file for approval. After approval of the proposed design, we will start production. This avoids surprises and guarantees that valves can always be fitted appropriately.
Product Request
Please use the form to request your product. Do you have any questions about the product? If so, please put that in the form as well. Our specialists will contact you immediately to discuss your needs.
