Habonim COMPACT Actuator - double acting
Product information
The Habonim Compact™ actuator is a quarter-turn rack & pinion pneumatic actuator with a unique design that maximizes output and minimizes air consumption.
In the Compact™ actuator, four pistons create output around one centrally located pinion. Using four pistons instead of the conventional number of two doubles the power of the actuator as a whole. At the same time, both pistons and chambers can be made smaller, resulting in lower overall air consumption and faster response times. The result is doubled output compared to a conventional rack & pinion of the same size, either half the size for the same output. This makes this actuator a very compact solution, which brings advantages if available space is scarce. The design of the actuator ensures a more stable movement of the pistons, making wear and tear less likely to occur with this actuator.
The double-acting version of the patented Compact™ actuator is actuated for both the input stroke and the output stroke via the air ports, allowing the actuator to maintain its position when the air supply fails. This achieves a fail to hold function. Habonim actuators are standard SIL 3 and ATEX 2GD c/g T4-T6 certified.
Specifications
- Versions: C15, C20, C25, C30, C35, C45, C60, C75, C90 , C100
- Output: 10Nm to 8,600Nm
- Interface: NAMUR VDI/VDE 3845
- Bottom flange: pattern in accordance with ISO 5211
- Temperature range NBR: -20⁰C to 80⁰C
- Temperature range Viton: -40⁰C to 120⁰C
- Control medium: control air, N2, CO2, natural gas
- Control medium connection connection: G1/4'' or G1/2'' (metric), ¼'' NPT or ½'' NPT (imperial)
- Housing material: aluminum or stainless steel
- ATEX 2GD c/g T4-T6
- IEC 61508-2 :2010 Sil 2 / SIL 3 certified
Application
The double-acting actuator series consists of ten variants, each of which can be equipped with eight different spring sets. This makes these actuators perfectly adaptable to specific local conditions and to a specific required tightening torque of a valve.
Habonim Compact™ actuators can be used on any type of quarter-turn valve, making them also applicable to any type of ball valve, butterfly valve and plug valve. Because of the compact design, these actuators are well suited for mounting when space is limited. Because of the SIL 3 certification, which makes the actuator fully SIL-2 certified in combination with a Habonim valve as a package, this actuator is well suited for use in a SIL loop. Because of its standard fast closure, this actuator is well suited for emergency shutdown service (ESD).
Product Request
Please use the form to request your product. Do you have any questions about the product? If so, please put that in the form as well. Our specialists will contact you immediately to discuss your needs.
