Conical ring with storm ribs
Product information
The conical ring with storm ribs can be laid loose on the inlet side of the valve before mounting the valve between the counter flanges.
The ring reduces the inlet of the valve relative to the outlet. This directs the medium to the center of the passage and prevents solids from remaining in the dead spaces of the valve. In addition, the ring is equipped with ribs that break up any eddies in the medium. Because the vortices are (partially) broken off, wear and tear on the plate, bore rings and internal parts is significantly reduced. Finally, the ring protects the bores of the valve which, as long as the ring is mounted, are completely free of wear. Thus, the conical ring becomes a wear part that can be exchanged preventively when needed.
Specifications
Application
The conical ring with storm ribs can be used for valves that are under (hydro)cyclones or are subject to violent eddies in the medium. The ring can be easily clamped between the flange and the valve. No modification of the valve is required.
Product Request
Please use the form to request your product. Do you have any questions about the product? If so, please put that in the form as well. Our specialists will contact you immediately to discuss your needs.
